GO Download

How to eradicate Android 5 1 1 Nexus 5 Lollipop LMY48B Guide

How to eradicate Android 5 1 1 Nexus 5 Lollipop LMY48B Guide

How to eradicate Android 5.1.1 Nexus 5 Lollipop (LMY48B) [Guide] - Once you have updated the Nexus 5 to the last image of Android 5.1.1 factory LMY48B Lollipop, you will need to obtain root access it again from the image of factory waste clean. Ill show how you can eradicate the Nexus 5 Lollipop LMY48B Android 5.1.1 firmware build number.

REQUIREMENTS
You want to install the factory image LMY48B if you already have root access, because the official OTA update can brick your device. Once this is done, follow this guide to get root access back.
Just follow this guide to the Google Nexus 5 and any other device Google Nexus.

Before starting
You make void the warranty following the guidance Nexus.
You must enable USB debugging mode. First, open the Options Developer, go to Settings> About device> tap the build number 7 times. Now you can find options Scheduler configuration now and USB debugging is within Developer options.
Download Google USB drivers to the Windows computer. If you find the guide does not work, try restarting your computer to get the drivers to work and return to the directory.
You must unlock the Nexus 5 bootloader before starting this guide. No way to do it with a locked bootloader.

AS ROOT Android 5.1.1 Nexus 5 image factory LOLLIPOP

1. Download and install the Android SDK from the official web site developers.
2. You can configure Windows ADB and Fastboot following our guide. If you already have, there is no need to do it again.
3. Download SuperSU you want to have Chain of Fire.
4. SuperSU transfer the file to the internal SD card storage device in the Nexus 5.
5. Download ClockworkMod Recovery want. CWM transfer the file to the same folder with the Asian Development Bank.
6. Completely off the Nexus 5 by holding the power button.
7. Start the Nexus 5 in Fastboot mode by pressing the volume and power buttons together and hold them firmly clamped until the menu appears.
8. Open the folder where you have ADB and CWM and click the mouse while holding down the Shift key and choose to open the windows command here since the new menu.
9. Now type this command: fastboot flash recovery recovery-clock-touch-6.0.4.5-hammerhead.img
10. Now look at the new menu in changing device and select the recovery option. Now you are entering recovery mode.
11. Choose the "flash zip from SD card" option, followed choose zip from sdcard ".
12. Locate the file has been transferred SuperSU prior to the root of storage and confirm to increase.
13. Once complete, go to the main recovery menu and choose to reboot.

Congratulations! Now you have gained root access recovery inside thanks to the SuperSU and you can flash a custom ROM again.

Go to link download