Thursday, August 25, 2016
HARD REST ACER A700 ICONIA TAB
HARD REST ACER A700 ICONIA TAB
Performing Factory Reset on Acer Iconia Tab A700
Factory or Hard (Full) Reset:
It may be necessary to perform a reset if your device fails to respond when buttons are pressed or the screen is tapped.
Warning:
This will erase all your personal information, any contacts stored on your device and any programs that have been installed. You should only perform a clean boot when all other options have failed to restore your device to an operational state.
Factory Reset Via Device Buttons:
- Hold the tablet in landscape mode, with the volume key on the top.
- Press and hold volume down and the power button to power on the tablet.
- When the tablet vibrates, release the power button but keep holding the volume down button.
- When the tablet vibrates a second time, release the volume down button and then press and hold the volume up button.
- When Booting recovery kernel image is shown in the upper left corner of the screen, release the volume up button.
- The Android system recovery menu is displayed.
- Use the volume down button to highlight wipe data/factory reset, then press the power button.
- Use the volume down button to select Yes - delete all user data, then press the power button.
- Highlight reboot system now, then press the power button. The tablet reboots and the factory reset is complete.
Here are the key combinations for the existing A700/A701 Acer and their effects
Definition
[Vol-] = button to decrease the volume, identified by two small black dots
[Vol +] = button to increase the volume, identified by a black dot
[Lock] = button to lock the screen rotation
[Power] = button to turn on the tablet
[Reset] = reset button to restart the tablet, located next to the USB port you need a paper clip to press it.
Boot into recovery:
- Press [vol-] + [power]
- Once the tablet vibrated, let go [power] and keep [vol-].
- Once the text that appears on the screen ("loading recovery kernel image"), let go [vol-].
Factory reset:
- Press [vol +] + [power]
- As soon as the tablet vibrates, let go of power and play several times [lock]
Fastboot boot mode:
- Press [vol-] + [power]
- As soon as the tablet vibrates, let go [power] and play [lock]
APX mode startup:
This mode is required to use the nvflash tool (not available yet)
- Press [vol +] and [vol-] (keep the pressure on both)
- Press [reset] once
- Releasing the volume buttons.
Nothing on the shelf says it is in this mode (black screen and LED power off), you must connect to the PC to make sure it detects the device.
[Vol-] = button to decrease the volume, identified by two small black dots
[Vol +] = button to increase the volume, identified by a black dot
[Lock] = button to lock the screen rotation
[Power] = button to turn on the tablet
[Reset] = reset button to restart the tablet, located next to the USB port you need a paper clip to press it.
Boot into recovery:
- Press [vol-] + [power]
- Once the tablet vibrated, let go [power] and keep [vol-].
- Once the text that appears on the screen ("loading recovery kernel image"), let go [vol-].
Factory reset:
- Press [vol +] + [power]
- As soon as the tablet vibrates, let go of power and play several times [lock]
Fastboot boot mode:
- Press [vol-] + [power]
- As soon as the tablet vibrates, let go [power] and play [lock]
APX mode startup:
This mode is required to use the nvflash tool (not available yet)
- Press [vol +] and [vol-] (keep the pressure on both)
- Press [reset] once
- Releasing the volume buttons.
Nothing on the shelf says it is in this mode (black screen and LED power off), you must connect to the PC to make sure it detects the device.
Go to link download
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment